Painting Bare Wood Hulls

WOOD BOAT HULL PREPARATION

1) Sand surface with 80-grit sandpaper.

2) Remove sanding residue by wiping with a rag dampened with Dewaxer 973.

3) Repair imperfections with KBS NuFill Epoxy Filler. Sand and wipe clean again with Dewaxer 973.

4) Apply the first coat of antifouling thinned 10% with Blue Water Reducer/Solvent 974.

5) Apply at least two more coats of antifouling (unthinned), allowing the appropriate dry times.